If you are looking for China golden supplier and China good supplier polyken steel pipeline tape, good quality and high quality polyken steel pipeline tape, please feel free to contact Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd.
Product use
(1) rust, weld, burr, oil, dirt and dry. This manual should be St3 and rust grade, mechanical rust should be consistent with SYJ 4007 to 86 Sa2.
(2) brush primer (manual or mechanical)
(3) When the primer is dry, it can be wrapped around the belt.
(4) with the detection of spark can fill the next groove.
Product storage
(1) tape in the transport process of exposure, rain, to prevent broken deformation.
(2) Store at about 20 degrees Celsius for about 48 hours if the transport or storage temperature is 5 degrees below the freezing point.
(3) should be stored in a cool, temperature 5 ~ 30 ℃ warehouse, for 12 months, away from heat and fire
System Description
The Anti-Corrosion layer POLYKEN 980 is engineered to assure a high bond to the primed surface with excellent conformability characteristics.
The adhesives in these and all POLYKEN tape systems contain proven anti-microbial additives.
The product, safe and clean, performs well in insulation, anticorrosion, mechanical strength and anticollision, moreover it is of low water absorption, long service life, wide usage and convenient in application. It is extensively used in the pipework of oil and natural gas transportation, petrochemical industry, electric power, metallurgy, urban natural gas network of pipes.
Features
-Resistant to soil stress - Excellent adhesion to pipe and self -Low cathodic protection -Long-term in-ground performance - Serve for low-high temperatures |
- Cold applied -Uniform coating thickness -Compatible with all pipe diameters and generic plant coating systems -Qualified ASTM D1000,AWWA C 214,EN 12068 standards |
Structure
Backing : Special blend of stabilized polyethylene | |
Adhesive : Butyl rubber and Adhesion Promoting Resins |
|
Color: Black |
Properties
Product Properties |
Test method |
Typical Value |
|||
POLYKEN980-15 |
POLYKEN980-20 |
POLYKEN980-25 |
POLYKEN980-30 |
||
Total Thickness |
15mil(0.381mm) |
20mil(0.508mm) |
25mil(0.635mm) |
30mil(0.762mm) |
|
Backing of PE film |
9 mils(0.229 mm) |
12mil(0.305mm) |
13mil(0.330mm) |
10mil(0.254mm) |
|
Butyl Rubber Adhesive |
6 mils(0.152 mm) |
8mil(0.203mm) |
12mil(0.305mm) |
20mil(0.508mm) |
|
Tensile Strength |
ASTM D1000 |
40 N/cm |
55 N/cm |
62 N/cm |
70 N/cm |
Elongation |
ASTM D1000 |
300% |
330% |
350% |
400% |
Peel Adhesion to Primed Steel |
ASTM D1000 |
24.5 N/cm |
25 N/cm |
26.5 N/cm |
30 N/cm |
Water Vapor Transmission Rate |
ASTM E 96 |
0.10g/m2 |
0.10g/m2 |
0.09g/m2 |
0.08g/m2 |
Water absorption after 1 day,At+23℃ |
ASTM D570 |
0.10% |
0.10% |
0. 08% |
0. 06% |
Volume Resistivity |
ASTM D 257 |
2.0 x 1015 ohm.cm |
2.5 x 1015 ohm.cm |
2.5 x 1015 ohm.cm |
|
Dielectric Strength |
ASTM D149 |
30 kV |
35 kV |
42kv |
43kv |
Ordering Information
POLYKEN 980 and 955 tape coatings are in roll form.
Eg.: POLYKEN980-20 BLK 6"×400'
POLYKEN 980 |
Product Model No. |
Standard ordering options |
20 |
Total tape thickness in mils |
15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm) |
BLK |
Tape backing color |
Black (BLK) |
6 |
Tape width in inches |
2"(50mm),,4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm) |
400 |
Tape roll length in feet |
100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M) |