PublishYou are here: Home » Products » Tools » Other Tools

R2*60*6*100*HRC45 Carbide 2 flutesTaper Ball nose end mill

Original
price: Negotiable
minimum:
Total supply:
Delivery term: The date of payment from buyers deliver within days
seat: Beijing
Validity to: Long-term effective
Last update: 2017-12-17 22:48
Browse the number: 144
inquiry
Company Profile
 
 
Product details
1. Specifications
-solid carbide taper ball nose end mills
- Up to: HRC60-65 high speed
- Super-fine micro grain carbide rod: WC=87.5%, Co=12.5%, TRS>4200N/mm2; Hardness>92.5HRA
- Grain size: 0.4-1 um
- Chemical composition: 10%-12%Co-WC
- Density: 14.10-14.45g/cm3
- Hardness: 91.5-92.5HRA
- Flexural strength: 3500-4000N/mm2
- Working material for steel and high speeding cutting;
- Any your drawings design are acceptable;
2. Raw Materials
- SANDVIK of Sweden;
- Teagutec of Korean;
- Kennametal of American;
- Guhring of Germany;
- YG10X of Zhuzhou China;
- WC25F of Taiwan;

3. Our Workshop and Advanced Equipments
- Walter CNC machine from Germany;
- ANCA CNC machine from Australia;
- Guhring detecting instrument from Germany;
- MICHEAL DECHAL CNC Machine from Germany;

4. Our advantages:
- Our carbide end mills are made by 5 Axi grainding machine with high toughness & high wearing precision;
- Our carbide end mills have long usage life lasting in hardened steels,
- Every product will inspected by Zoller Machine;
- Special CNC solid tools with high quality/ometitive price/good service;

5. Package
- One piece in one plastic box, and ten boxes in one carton;
- Any other requested packing are acceptable;

6.Maching Parameter Guidelines
1. The discharge of chips and rigidity of tools by the number of the flutes
The number of the flutes is essential part of the performance of end mills. Generally , if there
Are few flutes, it is easy to discharge of chips but relatively section areas get smaller so that
it makes the rigidity of tools fall down and enable tools to sway on cutting . On the other hand,
if there are many flutes , the section areas get larger and rigidity gets higher but the chip capacity
goes down owing to lessened the chip pocket and it is easily blocked up by chips.
2. The rigidity of tools by the length of the flute
The shorter of the tools, the higher the rigidity and performance of cutting. The length of the flute
become twice, the rigidity of the end mills falls to 1/8.Because end mills are the tools to move horizontal,
it is important for the rigidity of tools to be in inverse proportion to the length of tools. Using a longer flute
that need be is not good.
You can choose suitable flutes for your cutting conditions.
Total0bar [View All]  Related Comments
 
more»Other products

[ Products search ] [ favorites ] [ Tell friends ] [ Print ] [ Close ]